Geckoboard's IP addresses to whitelist on your network
What's an IP address?
It's a unique string of numbers (each number ranging from 0 to 255) separated by dots that identifies each computer using the Internet Protocol to communicate over a network.
Geckoboard's current IP addresses, which you may need to whitelist on your network, are as follows:
IP Ranges | |||||
23.xxx.xxx.xxx | 50.xxx.xxx.xxx | 54.xxx.xxx.xxx | 75.xxx.xxx.xxx | 107.xxx.xxx.xxx | 174.xxx.xxx.xxx |
23.21.191.184 |
50.16.234.49 |
54.221.237.240 |
75.101.131.85 |
107.20.157.253 |
174.129.252.239 |
23.23.160.105 |
50.16.244.16 |
54.221.237.241 |
75.101.143.33 |
107.22.199.240 |
|
23.23.160.138 |
50.16.244.232 |
54.221.237.243 |
107.21.246.196 |
||
23.23.164.233 |
50.16.246.110 |
54.243.137.243 |
107.22.179.153 |
||
23.23.165.66 |
50.16.250.95 |
54.243.235.136 |
|||
23.23.182.172 |
54.243.235.173 |
||||
23.23.196.105 |
54.163.253.57 |
||||
23.23.205.140 |
54.204.39.96 |
||||
23.21.125.254 |
Tip
Here they are in TXT and JSON format in case you prefer to whitelist them in the firewall rules automatically.
Note
The above list of IPs are for our pre-built integrations and custom Polling widgets - both of which make inbound requests into your network.
For custom Push widgets and Datasets, you'll need to allow access for making outbound requests from your network to Geckoboard, specifically to api.geckoboard.com (for Datasets), and to push.geckoboard.com (for custom push widgets).