Geckoboard's IP addresses to whitelist on your network

What's an IP address?

It's a unique string of numbers (each number ranging from 0 to 255) separated by dots that identifies each computer using the Internet Protocol to communicate over a network.

Geckoboard's current IP addresses, which you may need to whitelist on your network, are as follows:

IP Ranges
23.xxx.xxx.xxx 50.xxx.xxx.xxx 54.xxx.xxx.xxx 75.xxx.xxx.xxx 107.xxx.xxx.xxx 174.xxx.xxx.xxx
23.21.191.184 50.16.234.49 54.221.237.240 75.101.131.85 107.20.157.253 174.129.252.239
23.23.160.105 50.16.244.16 54.221.237.241 75.101.143.33 107.22.199.240  
23.23.160.138 50.16.244.232 54.221.237.243   107.21.246.196  
23.23.164.233 50.16.246.110 54.243.137.243   107.22.179.153  
23.23.165.66 50.16.250.95 54.243.235.136      
23.23.182.172   54.243.235.173      
23.23.196.105   54.163.253.57      
23.23.205.140   54.204.39.96      
23.21.125.254          

Tip

Here they are in TXT and JSON format in case you prefer to whitelist them in the firewall rules automatically.

Note

The above list of IPs are for our pre-built integrations and custom Polling widgets - both of which make inbound requests into your network.

For custom Push widgets and Datasets, you'll need to allow access for making outbound requests from your network to Geckoboard, specifically to api.geckoboard.com (for Datasets), and to push.geckoboard.com (for custom push widgets).

Was this article helpful?

Awesome! 👍  Thanks so much for your feedback!